When the car is in first gear, pressing the brake or pulling the handbrake, and releasing the clutch to start, if the car does not suddenly stop, it indicates that the clutch plate needs to be replaced. As the clutch pedal gets higher and longer, the wear of the clutch plates will gradually become more severe.
If the car is in first gear and the driver steps on the brake or applies the handbrake, releases the clutch and prepares to start. If the car does not suddenly stall at this time, it indicates the need to replace the clutch plate in a timely manner.
Normal use, replace the clutch plate and pressure plate around kilometers. If the clutch slips, it needs to be replaced in a timely manner. Usually it shows clutch slipping. Run at high speed. Step on the accelerator all the way to run inside. Step on the accelerator, it's fast, but the speed has increased. A state of obvious weakness.
When the car is in first gear, stepping on the brake or pulling on the handbrake, and releasing the clutch to start, if the car does not suddenly stop, it indicates that your clutch plate needs to be replaced. When starting a car, if the clutch is released too quickly, it can cause the engine to stall.
The following situation occurs when the clutch plate needs to be replaced: the clutch plate slips during sudden acceleration. The performance is that when the accelerator is pressed deeply, the engine speed can quickly increase, but the speed does not increase much. This is because the clutch plate is slipping, causing the engine to spin and not all power is transmitted to the gearbox.