Automobile chassis maintenance is often regarded as dispensable, far from engine and body so seriously, in fact, automobile chassis whether maintain wisely and directly related to vehicle safety, handling, comfort and economy all key performance, did not fall with a light heart.

One. Always check the engine oil.

Here include transmission, braking system, power steering system, on the one hand, in accordance with the instructions on a regular basis to the special maintenance service station to supplement or replacement, on the other hand, it is also necessary to check the car, the oil is in the car, see if the oil is in the upper and lower between the two scales, if lower than the line will be added, if the system has leakage, need to check out the leakage site, timely repair.

Two. The replacement of the two kinds of friction plates should be timely.

Brake and clutch of the two friction plates are consumables, will loss after a period of time, the loss of the original function. If not timely replacement will easily lead to an accident. The general vehicle has a corresponding warning indicator, will promptly issued a warning signal to remind the owners to change.

Now most of the car using the method of adhesive tape to the steel back, until the end of the friction plate wear, metal and metal direct contact will be issued, then it was late to change the friction plate. So they are fitted with electronic signal sensors, about 1.5 mm in the friction film is still left, the instrument panel on the brake lights will be lit, which reminds the car to replace the main replacement.

Three. Four wheel positioning error of small difference Trinidad

Rough look, the four wheels on the car seems to be upright on the ground, in fact, otherwise, if you use the instrument to measure, it will be found in the Y, X, Z three plane on the multi deflected a point of view, but the value is very small, generally only 2 to 0.5 degrees, the naked eye can not see. Don't look down upon these three small deflection angles, which determines the steering performance of the vehicle. If the crash, or the use of time is too long due to wear and tear, and the control will be greatly reduced. So in the manipulation of the steering wheel if you feel strange, it should be to the regular auto repair factory or professional four wheel alignment checkpoint to check, and make the corresponding adjustment. Not much, but to ensure the safety of driving.

Four. Chassis maintenance tire is the key

First, we should pay attention to the tire pressure, the inflated pressure is too high, the tire easy to burst; and the pressure is too low, the car resistance increases, the corresponding increase in fuel consumption. Also need to check the tire tread pattern on the surface of the tire tread pattern, there is no sharp nails, stones and broken glass, etc., so as not to stab tires. Tire tread pattern wear to a certain extent, you need to replace the tire. Usually when the pattern is worn out to only 1.5 to 2 mm, the tire has a specific marker, which will replace the tire.