01
06
Four mistakes in automobile repair and maintenance
Time:2015.01.06 Come:Yuhuan, teyu machinery Co., LTD fan clutch View:

When the maintenance and repair of the car there will inevitably be some errors,usually when the Internet, as much as possible to see this information, and not toremember the maintenance process, can avoid detours. Let your car healthpreservation. Today's special Yu fan clutch is four points do not introducemaintenance.

A tire nut oil, do not

Not to oil the wheel bolts and nuts on the. Special Yu Fan Clutch said repair, a handful of private car owners in order to prevent the wheel bolt and nut rust, installation willcreate new styles of bolts and nuts are coated with a lubricant, but this approach not only wrong, but also for traffic safety will bring risks. Bolt and nut, having the characteristics of self-locking between. And coated with lubricating oil, the decline of self-locking coefficient between the two smaller caused by self-locking performance. In the car at high speed, very easy to loose bolts and nuts and even fall off, cause traffic accidents, consequences be unbearable to contemplate.

Should pay attention to two, wash the car

Do not wash with water body interior. By the summer, common side of private car owners who wash the body of water, the side with the dishcloth, private car owners would like to remind is: body interior is best not to wash water directly. Because the pad underneath the cab floor is not "the boundless plain", need the structure of thegroove, driving below room floor pad vias very much. After washing with water, or deposited in the groove is not easy to dry, or rust flow to the gearbox and other partsfrom the through hole. Special Yu Fan Clutch remind especially good sealing performance of the car can not flush water directly body interior. The correct way is to wipe with a damp cloth, avoid direct water rinse.

Add three, cooling liquid

Different brands of cooling liquid do not mix. All know the engine cooling fluid should be added in time, but you are different brands of coolant to mix with it? If it is, or persuade you as early as possible to the coolant discharged, coolant and re add the same brand. Because the cooling liquid of different brands of its chemical propertiesmay vary disparities, such as black metal effective preservatives, but often have a corrosive effect on aluminum products; and is suitable for the aluminum alloypreservatives are harmful to the iron alloy. Because the cooling liquid of different brands with different preservatives, so cannot be mixed.

Should pay attention to four, startup

Don't step on the accelerator EFI car start. Before starting the engine throttle isstepped on several feet of many old driver of the habit, especially Yu Fan Clutchremind especially in the winter cold starts. But this method does not start the car for efi.

With the electronic control fuel injection engine with common carburetor engine is different, its fuel injection control device can automatically adjust the fuel according to the engine temperature, condition, make the engine start smoothly, namely in the coldstarting of vehicles, fuel injection control device can automatically increase the fuel supply quantity. So, the EFI car engine is started, no need to step on the gas, the more don't before starting continuous to hurry on, otherwise it makes engine startbad.