A lot of errors using most of the oil lubricating oil, think black change again, less to buy a bottle of add, either with hard to fill, in fact, these practices are not when. Andeveryone in the cause to burn oil vehicle, special Yu silicone oil fan clutch analysisis very easy to find is the engine of the reasons, there are some daily habits.
Special Yu silicone oil fan clutch to teach you how to solve the problem of oil burning car
Black only unreasonable
This kind of understanding is not comprehensive. For lubricating oil without quietdispersant, the color black is indeed oil has serious deterioration of theperformance of lubricating oil, but modern cars use generally with quiet dispersant.This quiet agent will adhere on the piston glue film and black carbon washing down and dispersed in oil, reduces the formation of engine of high temperature deposits,so the lubricating oil used for a period of time after the color is easy to turn black,but this time the oil is not completely metamorphic.
Not as much as you can
Lubricating oil should be controlled between the oil feet, lower scale line is good.Because too much oil from the cylinder and the piston in the gap from entering the combustion chamber burning coke formation. These carbon will improve the enginecompression ratio, increase the tendency to produce knock; coke deposition in the cylinder are red state but also easy to cause the premature combustion, such as falling into the cylinder will aggravate the wear of cylinder and piston, will accelerate oil pollution. Secondly, the lubricating oil too much increase the stirring resistancecrankshaft connecting rod, increase fuel consumption.
Use of additives
Really good lubricants is with a variety of engine protection function of the finished product, a variety of additives containing formulations, including antiwear agent andlubricating oil is most particular about formulation of equilibrium, in order to protect the various properties of the full play. Add other additive not only can not give the vehicle to bring additional protection, chemical and oil but easy to react, decrease the comprehensive performance of engine oil.
Supplementary cannot replace replacement
Always check the oil is right, but only added no replacement can only make up for the lack of oil quantity, but not fully compensate the loss of performance of lubricating oil. The lubricating oil in use process, because the quality of pollution,oxidation and other reasons will gradually decline, at the same time there will besome consumption, to reduce the number of.
The main source is the burning oil cylinder, and cylinder wall surface contact -piston cylinder, with the gap increased, caused by untight sealing for various reasons, resulting in oil up to the combustion chamber and the emergence ofburning oil, analysis on the margin of silicone oil fan clutch specific reasons are the following:
One, is the role of sealed piston ring. Quality of the piston rings is different, the elastic strength are different, and the high frequency reciprocating movement up and down in the cylinder, the wear volume differences emerged, the sealing effect is naturally different.
Two, is in line with the conditions of contact surface. The different models, differentprocessing precision. Economic type of car, its accuracy is slightly lower, part of the workshop gap is slightly larger than the high-end models, the part of the economy vehicle with full synthetic oil is not too appropriate, oil consumption will increase. In addition, the component assembly error is not a personality differences, lead to thevehicle.
Three, is with the use of time, carbon or manganese products -- product ofincomplete combustion, so that the piston ring adhesive lose elasticity, appear flat shaft friction, the wear of piston ring or wall, leading to the emergence of burning oil.
