The special margin fan Clutch vehicle maintenance wish you easily should be 51
Time：2013.04.28 Come：Yuhuan, teyu machinery Co., LTD fan clutch View：
May Day is approaching, many owners and friends choose to go out to use as a holiday traveling by car, this time there is a car-free living experience ended. Enjoy the complete return after the beauty of traveling, do you also think to pamper their car, give it to do a body check it? Vehicle maintenance and travel back to tell you about some considerations.
According to the special margin fan clutch noted, oil adequacy of the relationship to the engine can work. Check steps off the engine under the premise, first pull out the dipstick and then re-insert the dipstick, wipe with a cloth; - try to insert it in the end, otherwise the reading will be inaccurate; Finally, pull out the dipstick dipstick and check the oil level dipstick end. If the oil level is below or slightly above the line of low oil level, you need to remove the oil filler cap oil fill. Need to raise the amount of oil to the oil level reaches the line of low oil level on the dipstick and the oil level line between the subject after Note tighten the oil cap.
In the state of the engine cooling CHECK transparent coolant tank. Level maintained between the storage tank of the "F" and "L" tag line, meet the requirements, If the fluid level is below the "L" line, you need to raise the coolant, liquid level reached "F" Online.
After filling the coolant, the coolant level is decreased in a short period of time, may be a leak. Required visual inspection of the radiator, hoses, engine coolant filler cap, radiator drain cock and water pump to see if there is no water came out. If you do not find a leak, you need to open the car to the designated service station for further testing. Note that to prevent burns, do not remove the radiator cap when the engine hot.
After long-distance driving, the car's battery may be affected by strong vibration and loose or battery fluid spills. To check the external battery for corrosion or loose joints, cracks or pressure with Relaxation. If the battery is spilled battery fluid corrosion, need to use a mixed solution of warm water and baking soda and water to clean the joint external coated with grease to prevent further corrosion. If the connector is loose, required to tighten the a tight clamp nut, but not too tight, tighten to be able to keep the battery can be fixed in its place, too tight can damage the battery box.
After a long high-frequency rotation, the brake system is prone to problems. The first observation of the brake disc surface is smooth, if there is a significant groove, which is due to vehicles driving on the gravel road, some small gravel stuck between the brake discs and fender constant friction surface of the brake disc due to , in extreme cases can significantly affect braking performance, this time to open to the designated service stations check to see whether it is necessary to replace the brake pads.
Such as found that brake oily surface down to immediately check the brake oil line leaks. Check the brake, carefully wipe the dirt on the main cylinder, so as not to dirty thing to fall into the storage tanks. For there is no graduated cylinder, liquid level should be kept away from the top of the cylinder 6 mm, if graduated, as long as the liquid level can scale job.
Long-distance driving, the longest tire contact with the ground, wear the most powerful, it is a place you should check. General dust, soil, water washing on the line. However, if the glue asphalt, oil can not afford to flush. Now a dedicated tire pressure tank cleaning lotion, a spray, as long as the side of the tire can be dissolved away the mess, and make the tire brand new.
In addition, the vast majority of cars are used in radial tires, this tire wall is its weakest parts. Because the entire radial tire sidewall wire in use must also be very careful. The lot of the poor road conditions travel at high speed, the tire may hit the pit or other foreign matter, resulting in the tire between the impactor and the rim flange cause serious extrusion deformation, resulting in tire wall cord yarn breakage, then The air inside the tire will be formed from the broken yarn at the top of the drum kit. Such as tire bulge must be promptly replaced, or high-speed driving is likely to cause puncture accidents.
According to the special margin fan clutch understand, the car is in use, the general ambient air quality is better, the maintenance cycle regularly replace the air filter on it. Surrounding ambient air quality is poor, you should pay attention to cleaning the air filter, air filter is too dirty, will allow access to reduce the amount of air in the cylinder, causing the car's dynamic performance, not to mention speed up. During use, the air conditioning filter should be cleaned regularly or replaced, or clogged filter will prevent and reduce air entering the evaporator box, although the air conditioning was very large, but still do not feel cold, accompanied by some vehicle car smell.
